Main Article Content

Tests de contrôle de qualité des caractéristiques mécaniques pour les tuiles, large format en micro-béton : étude et réalisation


R K Bozabe
C A Toukourou
G A. Gbaguidi
M N Hounkonnou

Abstract

Le travail intitulé « Tests de contrôle de qualité des caractéristiques mécaniques pour les tuiles, large format en micro-béton : étude et réalisation » a pour objet principal de proposer une technologie d’amélioration des tests de contrôle de qualité des caractéristiques mécaniques suivantes : résistance à la flexion trois (3) points et quatre (4) points, résistance aux chocs et résistance à la traction du talon. A cet effet, une étude conceptuelle basée sur la 3ème loi de NEWTON : « principe de l’action et de la réaction » et le calcul de structures par la méthode des éléments finis a permis de modéliser, d’analyser et de dimensionner un nouveau dispositif qui respecte avec une certaine rigueur les recommandations et les exigences des documents normatifs [4]. Ce nouveau dispositif qui regroupe les différents tests de contrôle des caractéristiques mécaniques mentionnées ci-dessus a été réalisé et validé. Lors de la validation, nous avons comparé les résultats issus des simulations numériques par éléments finis et des essais réels. 

Mots-clés : micro-béton, tuile, dispositifs des tests, contrôle de qualité, caractéristiques mécaniques, action et  réaction, éléments finis et large format.

Tests of quality control of the mechanical characteristics for tiles, the wide size in micro-concrete: study and realization

The work entitled "tests of quality control of the mechanical characteristics for tiles, the wide size in microconcrete: study and realization " has for main object to propose a technology of improvement of the tests of quality control of the following mechanical characteristics: fold resistance three (3) points and four (4) points, shock resistance and traction resistance of the heel. For that purpose, an abstract study based on the NEWTON's 3rd law: " Principle of the action and the reaction " and the calculation of structures by the method of the finished elements allowed to model, to analyze and to size a new device which respects with a certain rigor the recommendations and the requirements of the normative documents [4]. This new device which groups together the various tests of control of the mechanical characteristics mentioned above was realized and validated. During the validation, we compared the results stemming from numeric simulations by finished elements and from real tries. 

Keywords : micro-concrete, tile, devices of the tests, the quality control, the characteristics mechanics, action and reaction, finished elements and wide size.



Journal Identifiers


eISSN: 1813-548X