Article Sidebar
Article Details
Issue
Section
Articles
http://ajfand.net/AJFAND/copyrightstatement.html
Published material in the AJFAND is covered by copyright. Authors transfer all rights to the journal upon publication. The Editor-in-Chief should grant permission for use/reprint of any published material in AJFAND.
AJFAND is open access and published under the Creative Commons Attribution-Non Commercial-No Derivatives 4.0 International license (see Copyright Statement on the AJFAND website).
Main Article Content
Development of frozen-fried yam slices: Optimization of the processing conditions
Abstract
The research performed on yam processing mainly concerns the production of crisps and flour. However, its transformation into deep-frozen French fries does not necessitate any other equipment than those used for potatoes. The industrial process of production of frozen French fries traditionally includes a pre-frying step. These steps contribute to the development of color and crispness, and the oil partially absorbed inhibits dehydration during the freezing step. The aim of this study was to
optimize frying conditions of deep-frozen fried yam (Dioscorea cayenensis var Kponan) slices. The effect of pre-frying time and temperature, final frying time and temperature on the oil uptake, texture, dry matter and colour of the fried yam slices has been studied. Frying conditions optimized with Box-Behnken experimental design were short pre-frying and frying conditions at high temperature characterized by prefrying
temperature at 157-170°C during 5-9s and frying temperature at 181-188°C for 2min 15s-2min 30s; or long pre-frying and frying conditions at low temperature characterized by pre-frying temperature at 150-158°C during 10-15s and frying temperature 170-177°C for 3-3min 15s. An adiabatic system was also developed by means of an insulator in which the core temperature of fried yam slices can be maintained constant at about 55°C after 15min of cooling, facilitating texture measurements at constant temperature. The present results may help in choosing the yam slices frying condition to be applied in order to achieve the desirable fried yam
slices quality, required for protection against certain diseases like obesity. These models may also provide guidance as to how to control these quality parameters by altering four key environmental factors, pre-frying temperature and time and, final frying temperature and time. This process can also be commercialized and does not necessitate any other cost for equipment than those used for potatoes French fries and might be an interesting way of added value processing for this highly perishable yam
tuber.
optimize frying conditions of deep-frozen fried yam (Dioscorea cayenensis var Kponan) slices. The effect of pre-frying time and temperature, final frying time and temperature on the oil uptake, texture, dry matter and colour of the fried yam slices has been studied. Frying conditions optimized with Box-Behnken experimental design were short pre-frying and frying conditions at high temperature characterized by prefrying
temperature at 157-170°C during 5-9s and frying temperature at 181-188°C for 2min 15s-2min 30s; or long pre-frying and frying conditions at low temperature characterized by pre-frying temperature at 150-158°C during 10-15s and frying temperature 170-177°C for 3-3min 15s. An adiabatic system was also developed by means of an insulator in which the core temperature of fried yam slices can be maintained constant at about 55°C after 15min of cooling, facilitating texture measurements at constant temperature. The present results may help in choosing the yam slices frying condition to be applied in order to achieve the desirable fried yam
slices quality, required for protection against certain diseases like obesity. These models may also provide guidance as to how to control these quality parameters by altering four key environmental factors, pre-frying temperature and time and, final frying temperature and time. This process can also be commercialized and does not necessitate any other cost for equipment than those used for potatoes French fries and might be an interesting way of added value processing for this highly perishable yam
tuber.
