Article Sidebar
Published:
Feb 14, 2024Keywords:
Article Details
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Open Access authors retain the copyrights of their papers, and all open access articles are distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution and reproduction in any medium, provided that the original work is properly cited.
The use of general descriptive names, trade names, trademarks, and so forth in this publication, even if not specifically identified, does not imply that these names are not protected by the relevant laws and regulations.
While the advice and information in this journal Area believed to be true and accurate on the date of its going to press, neither the authors, the editors, nor the publisher can accept any legal responsibility for any errors or omissions that may be made. The publisher makes no warranty, express or implied, with respect to the material contained herein.
Main Article Content
GPVDM simulation of layer thickness effect on power conversion efficiency of CH<sub>3</sub>NH<sub>3</sub>PbI<sub>3</sub> based planar heterojunction solar cell
Abstract
Perovskite-based solar cell technologies have been a very attractive area of research in recent years. Organic-inorganic perovskite materials are in an increased evolution in power conversion efficiency. Inorganic materials have been tested at the laboratory level but their power conversion efficiency is still limited. In this paper, we used the GPVDM software to study the effect of some parameters on power conversion efficiency in a planar heterojunction solar cell based on CH3NH3PbI3 as an absorbing layer. The modifications were made by considering layers of perovskite without defects. The results show that the efficiency of the power conversion can be improved by adjusting layer thickness; in our case power conversion efficiency was increased from 9.96 % to 12.9 %.
