Article Sidebar
Published:
Jul 20, 2013Keywords:
Article Details
Copyright belongs to the Faculty of Engineering, University of Nigeria, Nsukka, Nigeria
The contents of the articles are the sole opinion of the author(s) and not of NIJOTECH.
NIJOTECH allows open access for distribution of the published articles in any media so long as whole (not part) of articles are distributed.
A copyright and statement of originality documents will need to be filled out clearly and signed prior to publication of an accepted article. The Copyright form can be downloaded from https://www.nijotech.com/downloads/COPYRIGHT%20FORM.pdf while the Statement of Originality is in Statement of Originality.pdf (nijotech.com)
For articles that were developed from funded research, a clear acknowledgement of such support should be mentioned in the article with relevant references. Authors are expected to provide complete information on the sponsorship and intellectual property rights of the article together with all exceptions.
It is forbidden to publish the same research report in more than one journal.
Main Article Content
Structural Reliability of the Nigerian Grown Abura Timber Bridge Beam Subjected to Bending and Deflection Forces
Abstract
Structural reliability analysis was carried out on the Nigerian grown Abura timber, to ascertain its structural performance as timber bridge beams. Samples of the Nigerian grown Abura timber were bought from timber market, seasoned naturally and their structural/strength properties were determined at a moisture content of 18%. The determined strength properties were subjected to statistical analysis to determine some statistical parameters used in the design. Structural analysis and deterministic design of a timber bridge beam using the Nigerian grown Abura timber in accordance with BS 5268 were carried out under the Ultimate Limit State of loading. A computer programme in FORTRAN language was developed and used for reliability analysis of the Nigerian grown Abura timber bridge beam so designed, to ascertain its level of safety using First-Order Reliability Method (FORM). Sensitivity analysis was carried out by varying the depth of beam, imposed live load, breadth of the beam, unit weight of the Abura timber, span of the beam as well as the end bearing length. The result revealed that the Nigerian grown Abura timber is a satisfactory structural material for timber bridge beams at depth of 400mm, breadth of 150mm and span of 5000mm under the ultimate limit state of loading. The probabilities of failure of the Nigerian grown Abura timber bridge beam in bending and deflection are respectively, under the design conditions.
