Article Sidebar
Published:
Jul 20, 2013Keywords:
Article Details
Copyright belongs to the Faculty of Engineering, University of Nigeria, Nsukka, Nigeria
The contents of the articles are the sole opinion of the author(s) and not of NIJOTECH.
NIJOTECH allows open access for distribution of the published articles in any media so long as whole (not part) of articles are distributed.
A copyright and statement of originality documents will need to be filled out clearly and signed prior to publication of an accepted article. The Copyright form can be downloaded from https://www.nijotech.com/downloads/COPYRIGHT%20FORM.pdf while the Statement of Originality is in Statement of Originality.pdf (nijotech.com)
For articles that were developed from funded research, a clear acknowledgement of such support should be mentioned in the article with relevant references. Authors are expected to provide complete information on the sponsorship and intellectual property rights of the article together with all exceptions.
It is forbidden to publish the same research report in more than one journal.
Main Article Content
Calculation of Cogging Torque in Hybrid Stepping Motors
Abstract
When the windings of a hybrid stepping motor are unexcited the permanent magnet’s flux produces cogging torque. This torque has both desirable and undesirable features depending on the application that the motor is put into. This paper formulates an analytical method for predicting cogging torque using measured flux-linkage data. It assumes a linear magnetic circuit, where the magnetic stored energy and coenergy are numerically equal. Cogging torque is calculated as the differential of the magnetic coenergy with respect to rotor angular position at constant rotor excitation. By representing the flux-linkage data with analytical function, the method produced results that compare favorably with laboratory test results.
