Article Sidebar
Published:
Jun 30, 2017DOI:
10.4314/njt.v36i3.3Keywords:
Article Details
Copyright belongs to the Faculty of Engineering, University of Nigeria, Nsukka, Nigeria
The contents of the articles are the sole opinion of the author(s) and not of NIJOTECH.
NIJOTECH allows open access for distribution of the published articles in any media so long as whole (not part) of articles are distributed.
A copyright and statement of originality documents will need to be filled out clearly and signed prior to publication of an accepted article. The Copyright form can be downloaded from https://www.nijotech.com/downloads/COPYRIGHT%20FORM.pdf while the Statement of Originality is in Statement of Originality.pdf (nijotech.com)
For articles that were developed from funded research, a clear acknowledgement of such support should be mentioned in the article with relevant references. Authors are expected to provide complete information on the sponsorship and intellectual property rights of the article together with all exceptions.
It is forbidden to publish the same research report in more than one journal.
Main Article Content
AN EXPERIMENTAL STUDY ON THE USE OF POLYPROPYLENE WASTE IN BITUMINOUS MIX
Abstract
The work focuses on assessing the Marshall properties of High Density Polypropylene (HDPP) waste and its potentiality to mitigate pavement failures due to environmental and traffic loading. Based on design, 4.5, 5.0, 5.5, 6.0 and 6.5% bitumen contents were arbitrarily selected to prepare one hundred and five (105) Marshall specimens having respectively 0, 0.5, 1.0, 1.5, 2.0, 2.5 and 3.0% HDPP waste in Polymer Modified (PM) asphalt concrete. The specimens were tested for stability, flow, compacted density of the mix (CDM) and void analysis. Optimum parameter for Marshall properties obtained are 27.68kN, 2.54mm, 2.45g/cm3, 3.39%, 16.2% and 74.10% respectively for stability, flow, CDM, VIM, VMA and VFB. The results revealed enhanced engineering properties of 2% HDPP at an optimal bitumen content of 5.5% and could satisfy strength and durability requirements of heavy traffic situation.
http://dx.doi.org/10.4314/njt.v36i3.3
