Article Sidebar
Published:
Jan 15, 2018DOI:
10.4314/njt.v36i4.5Keywords:
Article Details
Copyright belongs to the Faculty of Engineering, University of Nigeria, Nsukka, Nigeria
The contents of the articles are the sole opinion of the author(s) and not of NIJOTECH.
NIJOTECH allows open access for distribution of the published articles in any media so long as whole (not part) of articles are distributed.
A copyright and statement of originality documents will need to be filled out clearly and signed prior to publication of an accepted article. The Copyright form can be downloaded from https://www.nijotech.com/downloads/COPYRIGHT%20FORM.pdf while the Statement of Originality is in Statement of Originality.pdf (nijotech.com)
For articles that were developed from funded research, a clear acknowledgement of such support should be mentioned in the article with relevant references. Authors are expected to provide complete information on the sponsorship and intellectual property rights of the article together with all exceptions.
It is forbidden to publish the same research report in more than one journal.
Main Article Content
Re-evaluation of characterisation and classification of Apa (<i>Afzelia bipindensis</i>) timber for structural use
Abstract
As a result of effect of geographical location on timber properties, there is need for constant determination of properties of timber. This paper presents the results of experimental tests carried out on three Apa (Afzelia bipindensis) timber logs grown in Kwara State, south-western periphery of the North Central Zone of Nigeria in order to ascertain its structural strength properties. Logs of Apa timber were air-dried and along the stem, 324 pieces of test specimens were prepared for determination of their strength properties using a universal testing machine (UTM) FS50AT model, (specimen prepared included 108 samples for tensile strengths parallel to grain, 108 samples for compression parallel to grain and 108 samples for bending parallel to grain) at a moisture content of 12%, in accordance with the Nigerian, British and European standards. The moisture content of 12 % was converted to 18% which is specified in a standard document, for the area. Statistical analysis was carried out using the strength properties for determination of mean, standard deviation, confidence limit and characteristic strength. The result revealed that the timber is satisfactory for structural purposes in construction works.
Keywords: Apa, bending strength, classification, compressive strength, structural use
