Article Sidebar
Article Details
Copyright belongs to the Faculty of Engineering, University of Nigeria, Nsukka, Nigeria
The contents of the articles are the sole opinion of the author(s) and not of NIJOTECH.
NIJOTECH allows open access for distribution of the published articles in any media so long as whole (not part) of articles are distributed.
A copyright and statement of originality documents will need to be filled out clearly and signed prior to publication of an accepted article. The Copyright form can be downloaded from https://www.nijotech.com/downloads/COPYRIGHT%20FORM.pdf while the Statement of Originality is in Statement of Originality.pdf (nijotech.com)
For articles that were developed from funded research, a clear acknowledgement of such support should be mentioned in the article with relevant references. Authors are expected to provide complete information on the sponsorship and intellectual property rights of the article together with all exceptions.
It is forbidden to publish the same research report in more than one journal.
Main Article Content
A Microprocessor-Based Control, Scheme for a PWM Voltage-Fed Inverter with an Induction Heating Tank Load
Abstract
In this paper, the flexibility of programmed control logic is exploited in the close loop control of a PWM thyristor voltage fed inverter supplying an induction heating tank load. The microprocessor used in the control is the MC6809 to which is interfaced the SY6522 versatile interface adapter (VIA). The microprocessor-based scheme performs the dual function of generating the thyristor gating signals as well as estimating and applying control actions to maintain the load power factor at unity and the power delivered to the load at a desired set-point value. The schemed also provides power circuit over-current and over-voltage protection against adverse changes in the inverter input supply and the load. The estimation of the control variables of the control scheme proportional plus integral controllers constitute the main control program while the application of thyristor gating signals and closed loop control actions are carried out in response to interrupts external to the microprocessor unit. Illustrative steady state and transient circuit of an experimental model of the induction heater are given.
