Article Sidebar
Article Details
In accordance with the Copyright Act of 1976, which became effective January 1, 1978, the following statement signed by each author must accompany the manuscript submitted: "I, the undersigned author, transfer all copyright ownership of the manuscript referenced above to the Nigerian Journal of Technological Development, in the event the work is published. I warrant that the article is original, does not infringe upon any copyright or other proprietary right of any third party, is not under consideration by another journal, and has not been published previously. I have reviewed and approve the submitted version of the manuscript and agree to its publication in the Nigerian Journal of Technological Development." A copyright transfer form may be downloaded from the NJTD Website (http://njtd.com.ng/index.php/njtd). Author(s) will be consulted, whenever possible, regarding republication of material. All authors must have access to the data presented and the authors and sponsor (if applicable) must agree to share original data with the editor if requested.
Main Article Content
Study of Breakage Tendencies of Palm Kernel, Coconut and Periwinkle Shells using Ball-Milling Process
Abstract
The needs for eco-friendly composites have initiated the use of agricultural wastes as possible replacements for expensive synthetic carbon and glass fillers for metal and polymer strengthening. In this study, degree of refinement of palm kernel shells, coconut shells and periwinkle shells has been investigated through ball-milling approach. Palm kernel, coconut and periwinkle shells were pulverised using disc grinder and refined using top-down approach under the same milling conditions. The particles of palm kernel, coconut and periwinkle shells obtained were analysed and their sizes were determined. Energy dispersive X-ray spectroscopic and X-ray Diffractometric analyses indicated different compositions of the examined agricultural wastes particles. Imaging sizing of the particles indicated attainment of nanoparticles when milling for 74 hours at 10 charge ratios for both carbonized and uncarbonized palm kernel, coconut and periwinkle shells. Comparison of sizes showed that uncarbonized palm kernel shell has a least grain size among other uncarbonized agricultural waste particles. Therefore, uncarbonised palm kernel shells have highest breakage tendency among others.
KEYWORDS: Degree, Refinement, Agricultural wastes, Fillers, Milling.
