Main Article Content

Determining the effect of tree size, bark-wood bond strength and tree form on the productivity of an excavator-based harvester in <i>Acacia mearnsii</i> in the KwaZulu-Natal forestry region of South Africa


M Ramantswana
A McEwan
J Pauw

Abstract

The aim of this study was to determine the effect of tree size, bark-wood bond strength and tree form on the productivity of cut-to-length harvesting of Acacia mearnsii, using an excavator-based harvester with a SP Maskiner harvester head in the KwaZulu-Natal forestry region of South Africa. Tree diameter and height measurements were used to determine individual tree volumes, after which the trees were classified into different bark-wood bond strength and tree-form classes. Time studies were carried out to determine harvester productivity. The results showed that tree size plays a crucial role in the productivity of the harvester, but bark-wood bond strength and tree form also influence productivity. The harvester productivity varied from 5.5 m3 per productive machine hour (PMH) in 0.05 m3 trees to 16.9 m3 PMH-1 in 0.25 m3 trees The bark-wood bond strength did not influence harvester productivity when handling small trees of lessthan 0.1 m3. In small trees, the productivity of the harvester was also not affected by different form classes, but as tree size increased, there was greater productivity variation between the different form classes.

Southern Forests 2012, 74(3): 151–157

Journal Identifiers


eISSN: 2070-2639
print ISSN: 2070-2620