Main Article Content

Experimentation and Prediction of Temperature Rise in Turning Process using Response Surface Methodology


BN Zeelan
S Cheneke
G Fekadu

Abstract

Reducing the temperature rise during turning operation improves the quality of the product and reduces tool wear. Experiments are conducted as per the Design of Experiments (DoE) of Response Surface Methodology (RSM) to predict the temperature rise by varying the cutting parameters such as cutting speed, feed rate and depth of cut. In the present study, the experiment was conducted on Aluminium Al 6061 by coated carbide tool. A second order mathematical model in terms of machining parameters was developed for temperature rise prediction using RSM. This model gives the factor effects of the individual process parameters. Values of Prob> F less than 0.05 indicate model terms are significant. The cutting speed is the most important parameter that cause the temperature of the turning process compared to the other factors such as feed rate and depth of cut. Validation results show good agreement between the actual process output and the predicted temperature rise.

Journal Identifiers


eISSN: 2305-3372
print ISSN: 2226-7522