Integrated biological, chemical and physical processes kinetic modelling <BR>Part 1 – Anoxic-aerobic C and N removal in the activated sludge system

Abstract

The biological kinetic Activated Sludge Model No. 1 (ASM1, Henze et al., 1987; Dold et al., 1991) for carbon (C) and nitrogen (N) removal is integrated with the mixed weak acid/base model of Musvoto et al. (1997, 2000a,b,c) to extend application of ASM1 to situations where an estimate for pH is important. Because chemical precipitation is generally not significant when treating municipal wastewaters for C and N removal, only gas and liquid phase processes were considered for this integrated model. The biological processes in ASM1 were modified to take into account the effect of the interaction of the weak acid/base species of the ammonia, carbonate and phosphate systems and pH on heterotrophic and autotrophic organism behaviour, which includes generation and utilisation CO₂ in metabolism, use of specific weak acid/base species for organism growth and generation and utilisation of H₊. With these modifications, simulations with the model were compared with those of ASM1 and experimental data in the literature; a good correlation was obtained. However, these comparisons are only a preliminary validation, because, despite their inclusion, the weak acid/bases and pH do not have a significant effect on the biological processes in the cases considered (i.e. well buffered wastewater). A difficulty in calibrating this model is selection of the k_LA value for the aeration system, which affects the pH in the anoxic and aerobic reactors through CO₂ gas exchange. Aerobic reactor outflows from two full-scale wastewater treatment plants with fine bubble aeration systems were found to be around 20% supersaturated with CO₂. The performance of a ND activated sludge system with low influent alkalinity is evaluated.

Keywords: Activated sludge, weak acid/base chemistry, integrated modelling, N removal

Water SA Vol. 31(4) 2005: 529-544