Main Article Content

Calamus deerratus fibre reinforced natural rubber vulcanizates


E Osabohien
BE Okoh
SHO Egboh

Abstract

This research study investigates the potentials of Calamus deerratus fibre (CDF) as a reinforcing filler in natural rubber, Standard Nigerian Rubber (SNR10)   vulcanizates. The Calamus deerratus was cut, dried, pulverized, characterized and incorporated into the natural rubber compounds and the effects on the cure  characteristics and physico-mechanical properties of the CDF-reinforced natural rubber vulcanizates were determined. The results of the analyses, in comparison with a standard carbon black, CB(N330)-filled vulcanizates showed that the CDF manifested a reinforcing effect on the SNR10 vulcanizates but inferior to carbon black, N330-filled vulcanizates. The maximum torque, abrasion resistance, modulus, specific gravity and hardness increased while the scorch time, cure time,   elongation at break and rebound resilience decreased with increasing filler content. The cure time and scorch time were however higher in CDF-filled SNR10   vulcanizates compared to those filled with carbon black, N330. Tensile strengths of CB(N330)- and CDF- filled vulcanizates increased to optimum levels at 40 phr  and 30 phr respectively and decreased with increasing filler content. The results however showed that CDF imparted lower reinforcing potential as shown by the   lower tensile strength, abrasion resistance and modulus. The hardness results of the CDF-filled vulcanizates showed slight superiority over that of CB(N330)-filled vulcanizates.

Keywords: Natural rubber, Calamus deerratus, fillers, reinforcement and vulcanizates.

Journal Identifiers


eISSN: 1997-342X
print ISSN: 1991-8631