Article Sidebar
Published:
Jan 28, 2023DOI:
10.4314/njtd.v19i4.9Keywords:
Article Details
In accordance with the Copyright Act of 1976, which became effective January 1, 1978, the following statement signed by each author must accompany the manuscript submitted: "I, the undersigned author, transfer all copyright ownership of the manuscript referenced above to the Nigerian Journal of Technological Development, in the event the work is published. I warrant that the article is original, does not infringe upon any copyright or other proprietary right of any third party, is not under consideration by another journal, and has not been published previously. I have reviewed and approve the submitted version of the manuscript and agree to its publication in the Nigerian Journal of Technological Development." A copyright transfer form may be downloaded from the NJTD Website (http://njtd.com.ng/index.php/njtd). Author(s) will be consulted, whenever possible, regarding republication of material. All authors must have access to the data presented and the authors and sponsor (if applicable) must agree to share original data with the editor if requested.
Main Article Content
Numerical Forced Convection Heat Transfer, Fluid Flow and Entropy Generation Analyses of <i>Al<sub>2</sub>O<sub>3</sub></i>- Water Nanofluid in Elliptical Channels
Abstract
This study investigates a three-dimensional elliptical microchannel heat sink for heat dissipation in laminar forced convection. The study seeks to improve thermal performance and overcome overheating associated with excessive temperature commonly experienced in heat-generating equipment, which is beyond the temperature usually specified by the manufacturer. The objective of the study is to evaluate the heat transfer, fluid flow, and entropy generation characteristics of Al2O3-water nanofluid in an elliptical cooling channel. The numerical analysis is investigated on the structure experiencing constant volumetric heat generation. The parameters considered are Reynolds number of 100 ≤ Re ≤ 500, nanoparticle concentration ϕ, from 0% to 4% with channel aspect ratio Ar from 1 to 3. The impacts of these parameters on the maximum temperature, heat transfer coefficient, friction factor, and volumetric entropy generation are reported. The study demonstrates that heat transfer is enhanced in the elliptical cooling channel at different aspect ratios, nanoparticle concentrations, and Reynold numbers. The results showed that as the nanoparticle concentration, channel aspect ratio, and Reynolds number (Re) increase, the maximum temperature, and total entropy generation decrease. As the channel aspect ratio increases at a specified Re = 200 and nanofluid concentration, ɸ = 3%, the maximum temperature, and total entropy generation decrease by up to 62% while the heat transfer coefficient increases by up to 78% and the friction factor increase by less than 2% with aspect ratio. However, the friction factor is not sensitive to the nanofluid concentration as a coolant.
