Investigation of the Kerr effect on polarised light

Abstract

A constructed Kerr cell with brass electrodes and liquid nitrobenzene was used for studying the Kerr effect on polarised light. Laser light was plane polarised and passed through an energised Kerr cell. The plane polarised light after travelling a path length equal to the cell electrode length in a birefringent medium, suffered optical retardance before passing through an analyser which then transmitted light of certain intensity to a photodiode. Data used were generated from experiments and theoretical considerations using Kerr’s law and Malus’ law. With crossed Polaroids, the Kerr cell behaved as an electro-optic shutter and the maximum light intensity transmitted rose steadily with increased phase difference to about 0.82. With parallel Polaroids, the maximum light intensity transmitted was higher and found to be 0.89 at zero phase difference. This value indicates a large phase delay and decreased to a non-zero value. At maximum electric field intensity, a ‘climbing’ of the nitrobenzene on the Kerr cell walls and electrodes was observed with more nitrobenzene attracted to the anode. The effect suspected to be of electrostatic origin may have been driven by the predominant ions in the nitrobenzene. Furthermore, the higher level of the nitrobenzene meniscus at the anode probably suggests that while the cathode injected carriers of negative charge into the liquid the injection of carriers from the anode was weaker. For better results, attention should be given to Polaroid quality, the purity of the liquid nitrobenzene and the length of the electrodes used.