Crude oil sorption capacity of modified and unmodified biowaste

Abstract

Contamination of water by crude oil is ubiquitous particularly in developing countries. The governments of affected countries raise a lot of concern because of the associated economic and environmental impacts which are not in tandem with the United Nations Sustainable Development Goals (SDGs), 6, 8, 11, 13 & 14. Remediation of crude oil-impacted water and soil become imperative. However, the exercise is expensive; hence the search for cheaper and local alternatives. In this study, unsegregated wood sawdust was collected from the various wood saw-dust dump sites within the main Timber shade in the vicinity of Udu Bridge, Udu LGA of Delta State, Nigeria. One half of the sample was chemically modified by acetylation using acetic anhydride while the other half wasn’t. They were characterized using Fourier Transformed Infra-Red Spectrophotometer (FTIR) and Scanning Electron Microscope coupled with Electron Dispersive X-ray (SEM/EDX) analyzer before employing them in the removal of the crude oil from the simulated crude oil spill- water media. The obtained results indicated that the modified sorbent (wood sawdust) sorbed more crude oil than the unmodified sorbent (wood sawdust). Experimental process control factors limited to time, sorbent dosage, particle size, was investigated using the modified sawdust. The modified sorbent gave maximum oil absorption capacity of 5.228 gg^-1 for sorption time, 4.759 gg^-1 for sorbent dosage and 5.838 gg^-1 for particle size analyses. The study contributes to the knowledge of sorption studies using unsegregated wood sawdust for remediation of crude oil-contaminated media.