The effects of the rock stratigraphy on TPH/PAH absorption and transmission in some sections of the Gokana and Khana Local Government Areas

Abstract

Concentration of TPH/PAH in soils in parts of Gokana and Khana local government areas of Rivers state were examined using samples from 30 shallow wells drilled with hand auger. The core intervals penetrated, ranged between 0 on the surface to 100cm at total depth and was composited into two sections corresponding to upper 0 – 0.5m and lower 0.51 – 0.1m sections respectively. The samples were described to determine their sedimentological characteristics and effect on absorption and transmission of fluids. The total hydrocarbon content in samples of the study area were determined following the EPA 1664 Hexane Method (Method No: EPA 418.1/413.2 & EPA 1664). Individual concentrations of identified PAH congeners were noted and combined to generate the PAH concentrations in each of the two composited sections of the 30 sampled locations. The sedimentology of the logged sections consists mostly of peaty clay, clayey sands and organic clay in the upper section and clayey silt and clayey sand in the lower section. TPH in the study area ranged between 20612mg/kg at Location 15 to 37.09mg/kg at Location 11 for the upper (0 – 0.5m) sections and 14731mg/kg at Location 12 to 14.67mg/kg at Location 17 for the lower (0.51 – 1m) section. PAH ranged from 9.55mg/kg at Location 12 to <0.01mg/kg at several other Locations for the upper (0 – 0.5m) sections and 5.71mg/kg at Location 11 to <0.01mg/kg at several other Locations for the lower (0.51 – 1m) section. Correlation of sedimentology descriptions with the geochemical analysis indicates high concentrations of total petroleum hydrocarbon (TPH) and polycyclic aromatic hydrocarbon (PAH) within the upper (0 – 0.5m) sections than in the lower (0.51 – 0.1m) sections in consonant with the stratigraphy of the logged section.