Article Sidebar
Published:
Feb 14, 2024Keywords:
Article Details
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Open Access authors retain the copyrights of their papers, and all open access articles are distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution and reproduction in any medium, provided that the original work is properly cited.
The use of general descriptive names, trade names, trademarks, and so forth in this publication, even if not specifically identified, does not imply that these names are not protected by the relevant laws and regulations.
While the advice and information in this journal Area believed to be true and accurate on the date of its going to press, neither the authors, the editors, nor the publisher can accept any legal responsibility for any errors or omissions that may be made. The publisher makes no warranty, express or implied, with respect to the material contained herein.
Main Article Content
Enhancing of CH<sub>3</sub>NH<sub>3</sub>SnI<sub>3</sub> based solar cell efficiency by ETL engineering.
Abstract
Solar cells based on organic-inorganic perovskites (PVK) are the subject of several researches in laboratories around the world. One of the most promising hybrid perovskite is the methylammonium lead tri-iodide MAPbI3 that is suitable for sun light harvesting. But the MAPbI3 is a toxic material, so in this paper is proposed another nature friendly candidate which is the methylammonium tin tri-iodide MASnI3. The proposed material is inserted into an n-i-p heterojunction solar cell which structure is electron transport layer (ETL)/PVK/hole transport layer (HTL). The used HTL is the PEDOT: PSS in combination with one of two ETLs which are the PCBM and the IGZO. Simulation efforts using 1D SCAPS was carried. It is found that IGZO ETL based solar cell yields a higher power conversion efficiency (PCE) compared with PCBM ETL based solar cell in the same thickness.
