Article Sidebar
Published:
Feb 14, 2024Keywords:
Article Details
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Open Access authors retain the copyrights of their papers, and all open access articles are distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution and reproduction in any medium, provided that the original work is properly cited.
The use of general descriptive names, trade names, trademarks, and so forth in this publication, even if not specifically identified, does not imply that these names are not protected by the relevant laws and regulations.
While the advice and information in this journal Area believed to be true and accurate on the date of its going to press, neither the authors, the editors, nor the publisher can accept any legal responsibility for any errors or omissions that may be made. The publisher makes no warranty, express or implied, with respect to the material contained herein.
Main Article Content
CFD simulation of natural convection and heat transfer in a flat solar thermal collector with fins on the glazing - horizontal case
Abstract
This study is based on a CFD simulation of a flat horizontal solar thermal collector containing fins on its inner face of the glazing. The walls of the solar collector with insulation are considered adiabatic and the rest of the walls are at constant different temperatures. The principal objective of this work is to study the effects of the number of fins that changed from 0 to 30, as well as their length varied from 0 to 0.8 on the air flow and heat transfer characteristics. It has been observed that the heat transfer rate is strongly affected by the number of fins and the length of the fins. The obtained result showed that the increase of the fins reduces the heat loss by convection by 54 %.
