Article Sidebar
Published:
Aug 2, 2022Keywords:
Article Details
Open access articles published in the Journal of Agriculture, Science and Technology are under the terms of the Creative Commons Attribution (CC BY) License which permits use, distribution and reproduction in any medium, provided the original work is properly cited. The CC BY license permits commercial and non-commercial re-use of an open-access article, as long as the author is properly attributed.
Copyright on any research article published in the Journal of Agriculture, Science and Technology is retained by the author(s). The authors grant the Journal of Agriculture, Science and Technology with a license to publish the article and identify itself as the original publisher. Authors also grant any third party the right to use the article freely as long as its original authors, citation details and publisher are identified.
Use of the article in whole or in part in any medium requires proper citation as follows:
Title of Article, Names of the Author, Year of Publication, Journal Title, Volume (Issue) and page. Links to the final article on the JSRE website are encouraged.
The Creative Commons Attribution License does not affect any other rights held by authors or third parties in the article, including without limitation the rights of privacy and publicity. Use of the article must not assert or imply, whether implicitly or explicitly, any connection with, endorsement or sponsorship of such use by the author, publisher or any other party associated with the article.
For any reuse or distribution, users must include the copyright notice and make clear to others that the article is made available under a Creative Commons Attribution license, linking to the relevant Creative Commons web page. Users may impose no restrictions on the use of the article other than those imposed by the Creative Commons Attribution license.
To the fullest extent permitted by applicable law, the article is made available as is and without representation or warranties of any kind whether express, implied, statutory or otherwise and including, without limitation, warranties of title, merchantability, fitness for a particular purpose, non-infringement, absence of defects, accuracy, or the presence or absence of errors.
Main Article Content
Development of an IoT-based automatic fertigation system
Abstract
Fertigation supplies water and liquid fertilizer through the same channel to plants. Using drip irrigation set up for fertigation allows the root zone of the plant to be continuously supplied with nutrients and water throughout the farm season. Conventionally, fertigated systems are controlled using pre-set timers to turn on and off fertilizer injectors and irrigation pumps, and also to set the frequency and duration of supply. Therefore, fertigation management is usually based only on predictive algorithms or historical data, which may not be accurate for all situations. Development of a microcontroller-based fertigation management system within the Nigerian (Sub-Saharan Africa) region using a capacitive soil moisture sensor and a JXCT-IOT Frequency Domain Reflectometry (FDR) soil nitrogen sensor is presented. The sensors are placed in the soil around the root region of plants to enable a microcontroller to monitor the soil properties, determine how much water or nutrients the plant needs, and supply the amount needed through a drip irrigation framework. The tap water and urea solution are placed inside separate reservoirs and supplied to the plant through solenoid valves controlled by the microcontroller. Furthermore, an Internet of Things (IoT) client (Blynk IoT) was integrated with the fertigation system so that the fertigation process, as well as the soil state, could be monitored and controlled remotely. The data read from the sensors as well as the state of the solenoid valves were sent over the internet to be stored on the Blynk servers. A website and mobile (Android) dashboards were also created using the Blynk IOT platform to display the states of the valves and the sensor readings. The automatic fertigation system was found to be functional. The system keeps the soil moisture and nitrogen content between the recommended ranges: moisture content between 25% and 46% and nitrogen content between 20 mg/kg and 30 mg/kg for cucumber crops. Fertigation events occur every morning between 5 and 6 am.
