Geophysical and geotechnical investigations of the site of a collapsed two-storey building in Modomo, Ile-Ife, Southwestern Nigeria

Abstract

Geophysical and the geotechnical methods were used to study the site of a collapsed two-storey building in order
to determine the sequence and competence of the subsurface layers and determine the cause of the collapse of the building. The geophysical method employed the electrical resistivity method involving one dimensional (1D) Vertical Electrical Sounding (VES) and the two dimensional (2D) imaging techniques. Three VES stations were occupied using Schlumberger electrode configuration. 2D imaging data were acquired along four traverses using dipole-dipole electrode configuration. The geotechnical method involved Cone Penetration Test (CPT). CPT data was acquired at two points with the aid of 2.5 ton Dutch CPT machine. The results showed four subsurface layers based on the 1D VES results and 2D imaging results namely: topsoil, weathered layer, fractured basement rock and fresh basement rock. The topsoil resistivity varied from 116 Ωm to 191 Ωm and has thickness of about 1.5 m. It was classified as moderately competent. The second layer is weathered rock with resistivity varying between 92 Ωm and 327 Ωm and of about 8 m to 13 m thickness. This layer is also moderately competent. The third layer is fractured basement rock. It underlies the weathered rock and have resistivity varying from 391 Ωm to 405 Ωm. Its thickness varied from about 2 m to 20 m. This layer is competent. The fourth layer is the fresh basement rock having resistivity varying from 1365 Ωm to 12348 Ωm and is highly competent. The subsurface materials in the area are competent and can sustain the foundation of the building. Hence, the study concluded that the building collapse did not result from incompetent subsurface materials. Factors other than incompetent subsoil material that is human factors are believed to be responsible. This study has demonstrated the effectiveness of geophysical and geotechnical investigations in determining the competence of subsurface materials at engineering sites.