Article Sidebar
Published:
Nov 2, 2022DOI:
10.4314/njt.v41i3.2Keywords:
Article Details
Copyright belongs to the Faculty of Engineering, University of Nigeria, Nsukka, Nigeria
The contents of the articles are the sole opinion of the author(s) and not of NIJOTECH.
NIJOTECH allows open access for distribution of the published articles in any media so long as whole (not part) of articles are distributed.
A copyright and statement of originality documents will need to be filled out clearly and signed prior to publication of an accepted article. The Copyright form can be downloaded from https://www.nijotech.com/downloads/COPYRIGHT%20FORM.pdf while the Statement of Originality is in Statement of Originality.pdf (nijotech.com)
For articles that were developed from funded research, a clear acknowledgement of such support should be mentioned in the article with relevant references. Authors are expected to provide complete information on the sponsorship and intellectual property rights of the article together with all exceptions.
It is forbidden to publish the same research report in more than one journal.
Main Article Content
Modelling of the temperature profile of heat sinks for a thermoelectric cooler module
Abstract
Thermoelectric refrigeration achieves cooling through Peltier and Seebeck effect. Heat sinks attached to the hot and cold sides of the thermoelectric module help to efficiently dissipates and absorb heat. This research modelled the temperature profile across a heat sink and its optimization for a thermoelectric refrigeration application. Simulation was carried out using MATLAB to visualize the performance of the heat sink. The optimization was done using FMINCON in MATLAB by setting upper and lower bounds to satisfy space and volume requirement. The optimum values for the hot and cold heat sink geometry obtained using FMINCON tool in OPTIMTOOL box in MATLAB, yields number of fins as 10, fin spacing as 0.003m, the fin thickness as 0.002m and fin length as 0.015m with an optimum temperature of -0.8639.
