Advances in Medical, Pharmaceutical and Dental Research (AMPDR) is a peer-reviewed, open access, interdisciplinary journal, with two issues yearly. The focus of the journal is on theories, methods, and applications in computing and engineering. The journal covers all areas of computing, engineering, and technology, including interdisciplinary topics.

Types of Manuscripts

AMPDR publishes the following types of manuscripts, please choose the best fit:

Original Research Papers:

Submitted articles should start with a 300 words summary/abstract which provides a brief account of the work by clearly stating the purpose of the study and the methodology adopted, highlighting major findings briefly. The main file should contain a title page, abstract, main text (including the introduction, methodology, results and discussion) and references. Acknowledgement and conflict of interest statement should also be provided if applicable (

AMPDR is committed to maintaining the highest standards of publication ethics and to supporting ethical research practices. 

Manuscript Preparation

Authors are required to check off their submission's compliance with all of the following items, and submissions may be returned to authors that do not adhere to these guidelines.

1. Correct scientific English language must be used all over the manuscript. British dictionary should be followed for vocabulary and grammar.

2. The manuscript should be submitted in Microsoft Word or PDF formats.

3. Text should be typed in 12 pt Times New Roman font, single column, 1.5-line spacing and wide page margins (2.5 cm margins).

4. The cover page should only include the manuscript title, author names, affiliations, abstract, graphical abstract and keywords.

5. The title should be indicated in bold font, author names should be formatted as “First name, SURNAME”.

6. Corresponding author indicate his/her affiliation, address, telephone number, fax number, and e-mail address in the first page of the manuscript. 

7. Abstract: This should be presented as one paragraph describing the purpose, results and major conclusions. It is limited to 300 words. The abstract should not contain any undefined abbreviations or references.

8. Graphical Abstract: that is a single schematic image which visually represents the main findings of the article, allowing readers to easily capture the content of the article at a single glance. The graphical abstract must meet the same quality and permissions standards as any other figure in the article. A caption is not needed. The graphical abstract should be legible at a size of 130 × 50 mm using a regular screen resolution of 96 dpi.

9. A maximum of six keywords should be provided and separated with “;”.

10. The text of a research manuscript should be divided into the following sections:   Introduction, Materials and Methods/ Experimental, Results and Discussion, Conclusions, Acknowledgements (Funding), Conflict of Interest, and References.

11. Methods must be described in sufficient detail to allow the experiments to be repeated by other researchers. Data and statistical analysis should be a mentioned.

12. Examples of typical Westerns/PCRs/immunohistochemistry (with associated quantitative data where such experimentation has been conducted) are to be provided.

13. Under the material and methods section new synthesized compounds should be identified by IUPAC nomenclature

14. Figures and tables must be cited in text and placed in the manuscript right after their first in-text citation.

15. Figures must be integrated in the manuscript in image format (JPG, TIFF, BMP). The minimum resolution for figures is 150 DPI.

16. Reference citations should be styled according to the Vancouver Reference Style. Number of references should not exceed 50 references for original research articles.

17. The use of footnotes should be as minimum as possible.

18. Manuscript length should not exceed 40 A4-size pages.

19. For manuscripts related to synthesis of drug like molecules, authors must provide copies of spectra (at least 1H-NMR) for all final compounds in the supplementary material section. For papers involving natural products, or more complex molecules, additional 2D NMR spectra should also be provided. For manuscripts involving enzyme inhibition or receptor binding assays, authors should provide a graph that shows the data that was used to calculate the IC50, (or KM, KD etc) value for each compound. Provide a separate graph for each compound.

20. Conflict of Interest: Authors must disclose all relationships or interests that could have direct or potential influence or impart bias on the work.

21. Research involving human participants, Statement of human rights: When reporting studies that involve human participants, authors should include a statement that the studies have been approved by the appropriate institutional and/or national research ethics committee and have been performed in accordance with the ethical standards as laid down in the 1964 Declaration of Helsinki and its later amendments or comparable ethical standards. The following statements should be included in the text before the References section:

Ethical approval:

 “All procedures performed in studies involving human participants were in accordance with the ethical standards of the institutional and/or national research committee and with the 1964 Helsinki declaration and its later amendments or comparable ethical standards.”

Authors are required to confirm that consent has been obtained when applicable. In case of randomized clinical trial, the authors are expected to provide the registration status.

22. Statement on the welfare of animals. The welfare of animals used for research must be respected. When reporting experiments on animals, authors should indicate whether the international, national, and/or institutional guidelines for the care and use of animals have been followed, and that the studies have been approved by a research ethics committee at the institution or practice at which the studies were conducted (where such a committee exists). For studies with animals, the following statement should be included in the text before the Reference section:

Ethical approval: “All applicable international, national, and/or institutional guidelines for the care and use of animals were followed.” If applicable (where such a committee exists): “All procedures performed in studies involving animals were in accordance with the ethical standards of the institution or practice at which the studies were conducted.”

Review articles

AMPDR welcomes the publication of comprehensive analysis reviews in the medical, pharmaceutical or dental field as literature reviews, systematic reviews and meta-analyses. Critical Reviews manuscripts should summarize information that is well known and emphasize recent developments over the last 3 years with a prominent focus on critical issues

Reviews should be written in a systematic fashion with a clear clinical or research question defined, in order to fulfil its goal to update knowledge and generate guidelines about a topic of interest in the medical field.Manuscripts should include the following sections: Introduction where the problem is defined and the issue if generally brought to the reader; Analytical Discussion where all statements are based on the appropriate citations; and Conclusions with the level of evidence well-defined according to the type of the research question.

There is no word or page limit for review articles.

Abstract should not exceed 300 words, and references not exceeding 150 articles.

The use of analytical/comprehensive figures and comparative tables in the review article is highly encouraged.

Clinical review articles have a set limit of 4000 words including: introduction, materials,   methods, results, discussion, and excluding abstracts, acknowledgments, figures, legends, and, references. The total of 6 figures of tables of to maximum of 60 references and must contain a 300 word-abstract is permitted.

Supplemental appendices for other supporting information would be available online only)

Case reports

Case reports are accepted within the clinical field to add short information related to an investigative research.

Cases reports must be brief not exceeding 10 A4- pages and follow the following format: Cases and Methods Section, Discussion section that analyzes the case and a Conclusion section.

Not more than 4 figures and/or tables and up to 25 references are allowed.

Ethical considerations stated above are applied and authors are required to provide the patient’s consent with the manuscript while submitting case reports.

Images and figures submitted should be minimally processed and should reflect the integrity of the original data. In the images, adjustments to images in brightness contrast or colour balance should be applied equally to the entire image provided they do not disturb any data in the figure including the backgrounds.

AMPDR will frequently publish other types of papers, including invited editorials and special reviews from conference presentations. These publications will be commissioned and specific instructions will be provided to authors for their preparation.ِ

Manuscript Specifications

It is AMPDR policy to publish only original and unpublished research work that has not been published previously, accepted for publication or is being considered for publication elsewhere in any form, in print or in electronic media, either in whole or substantial part, in English or in any other language. Special issues may contain papers from a conference where special issues and/or conference proceedings have different peer review procedures involving, for example, guest editors, conference organizers or scientific committees. Authors contributing to these projects may receive full details of the peer review process on request from the editorial office.

Prospective organisers of a Special Issue should initially contact the Editor to agree to the appropriateness of the content, the number and size of papers, the refereeing process (including the names of prospective referees), and the timescale for receipt of final copy after reviewing.

It is helpful for readers if your article is concise, but clarity is essential. Short sentences and paragraphs make reading easier. You should aim for consistency within your article in matters such as hyphenation and spelling.

All acronyms and abbreviations should be clearly explained when they first appear in the text and keep it to a minimum, and all units used should be consistent throughout the article.

  • Language

Manuscripts must be written in the English language. They should be clear, concise and grammatically correct. Editors reserve the right to modify accepted manuscripts that do not conform to scientific, technical, stylistic or grammatical standards, and minor alterations of this nature may not be seen by authors until the proof stage. Authors for whom English is a second language may wish to consider having their manuscript professionally edited before submission to improve the English. Manuscripts should be carefully prepared, spell checked, grammar checked and submitted in final form.

  • File Format

All manuscripts should be submitted in Microsoft Word. Documents should not be locked or protected. Manuscripts for review must not be bigger in size than 2 MByte and must consist of no more than two files and should, ideally, be a single editable (word processor) file with figures and tables added at the context.

  • Submission Length

Articles or Case Studies should be up to a maximum of 10000 words in length. This includes all text, for example, the structured abstract, references, all text in tables, and figures and appendices.

  • Page Layout

The page is standard A4 page with a minimum margin of 2.5 cm from each side. The text is typed with a minimum of 1.15 spacing with sequential line numbers throughout the entire document.

  • Page Numbering

Pages must be numbered consecutively including those containing acknowledgements, references, tables and figures.

  • Font

12-point Times New Roman. For mathematical symbols, Greek letters and other special characters, the Symbol font (rather than the normal text font) must be used for Greek letters and mathematical symbols. Word Equation Editor/MathType should be used only for formulae that cannot be produced using Symbol font.

  • Figure Formats

Figures inside the text should be professional in appearance and have clean, crisp lines. Hand drawings and hand lettering are not acceptable. Figures and their legends should be grouped together as a list at the end of the paper, before the appendices (if present). It should be numbered consecutively. If figures have been supplied as a list at the end of the text file (as recommended), they should appear above their respective legend. The word figures should be abbreviated in the text (e.g. Fig. 1; Figs. 2 and 3), except when starting a sentence. Photographic illustrations should also be referred to as Figures. Labels should be proportionate with the size of the figures on the journal page. All figures should be supplied at the highest resolution/quality possible with numbers and text clearly legible. Electronic figures created in other applications should be supplied in their original formats and should also be either copied and pasted into a blank MS Word document or submitted as a PDF file. 

  • Figures format as a supplementary material

If the figures are submitted separately as supplementary material, then figure files should be supplied as follows:

  • Photographic figures should be saved in tif format at 300 d.p.i. (or failing that in jpg format with low compression).
  • Line figures should be saved as vector graphics (i.e. composed of lines, curves, points and fonts; not pixels) in pdf, eps, ai, svg or wmf format, or embedded as such in Word, as this gives the best possible online publication quality.
  • Combination figures: (those composed of vector and pixel/raster elements) should also be saved in pdf, eps, ai, svg or wmf format where possible (or embedded as such in Word).
  • If line figures and combination figures cannot be saved in vector graphics format, they should be saved in tif format at high resolution (i.e. 600 d.p.i.) (do not save them in jpg format as this will cause blurring). Note that line and combination figures supplied in tif format are down sampled for online publication, authors should therefore preferentially opt for vector graphic formats for these figure types (note, however, that for print publication full resolution files will be used).
  • Tables

When tabular material is necessary, it should not present the same data in both figure and table form or repeat large numbers of values from Tables in the text. Tables should be provided in an editable format (rather than as embedded images or separate PDF files), it should be formatted using the table function of the word-processing program rather than by aligning columns in text with tabs and spaces or using text boxes. Give each table a brief title. Ensure that any superscripts or asterisks are shown next to the relevant items and have explanations displayed.

Manuscripts structure

Manuscripts should be organized as follows:

  • Separate title page

This should contain:

  • Title of the article

A concise and informative title (as short as possible). Please avoid the use of long systemic names and non-standard abbreviations, acronyms or symbols.

  • Author/s name/s and affiliations 

Please list the given name(s) and family name(s) of each author, then institutional affiliation addresses immediately after the author's name, and provide the full postal address of each affiliation, including the country name and, if available, the e-mail address of each author. You can use superscript numeric identifiers to link an author with an address where necessary. Please clearly indicate the Corresponding author who will handle correspondence at all stages of refereeing and publication, also post-publication. Ensure that the e-mail address is given and that contact details are kept up to date by the corresponding author.

  • Abstract

Your abstract should give readers concise information about the content of your article. It should be informative, accessible and not only indicate the general scope of the article but also state the main results obtained and conclusions drawn using simple, factual, numbered statements. It should be suitable for direct inclusion in abstracting services and should not exceed 300 words. The structured abstract should consist of the following sections and each section of the abstract is limited to no more than 100 words:


Design/ methodology/ approach


Research implications/ limitations

Practical implications/ limitations


  • Keywords

A list in alphabetical order not exceeding ten words or short phrases, excluding words used in the title.

  • Introduction

This should be concise and describe the nature of the problem under investigation, outline the essential background, and the reasons for carrying out the work. It should also set your work in the context of previous research, citing relevant references. Introductions should expand on highly specialized terms and abbreviations used in the article to make it accessible for readers.

  • Methods

Provide sufficient details of the experiment, simulation, statistical test or analysis carried out to generate the results to enable the work to be repeated.

  • Results

You should detail the main findings and outcomes of your study, draw attention in the text to important details shown in tables and figures.

  • Discussion

Point out the significance of the results in relation to the reasons for doing the work, and place them in the context of other work.

  • Conclusion

Highlight the novelty and significance of the work and any plans for future relevant work.

  • Acknowledgments

Identify the source(s) of funding for the research. It should acknowledge any research assistants or others who provided help during the research (e.g., carrying out the literature review; producing, computerizing and analysing the data; or providing language help, writing assistance or proof-reading the article, etc.) but who are not included among the authors. It should state where and when any earlier versions of the paper were presented (e.g. at a seminar or conference). Lastly, it should acknowledge the help of all individuals who have made a significant contribution to improving the paper (e.g. by offering comments or suggestions).

  • References:

In text references:

References to other publications in your text should be written as follows:

Single author: (Last name, year)

Two authors: (Last name and Last name, year)

Three or more authors: (Last name et al., 2006) Please note, ‘et al' should always be written in italics.

List of references:

At the end of your paper, please supply a reference list in alphabetical order. Where applicable, author(s) name(s), journal title/book title, chapter title/article title, year of publication, volume number/book chapter and the pagination must be present. Use of DOI is highly encouraged. Where a DOI is available, this should be included at the end of the reference. Reference citations should be styled according to the Vancouver Reference Style. Authors are responsible for the accuracy of cited references and these should be checked before the manuscript is submitted. Make sure that all references mentioned in the reference list are cited in the text, and vice versa. Any references cited in the abstract must be given in full. Please note that if references are not cited in order the manuscript may be returned for amendment before it is passed on to the Editor for review.

A few other styles point. These apply to both the main body of text and your final list of references.

  1. When referring to pages in a publication, use ‘p.(page number)’ for a single page or ‘pp.(page numbers)’ to indicate a page range.
  2. Page numbers should always be written out in full, e.g. 175-179, not 175-9.
  3. Where a colon or dash appears in the title of an article, the letter that follows that colon or dash should always be lower case.
  4. When citing a work with multiple editors, use the abbreviation ‘Ed.s’.

Manuscript Submission:

AMPDR uses a fully web-based system for manuscript submission and peer review processes and submission must be made using our online service, and the journal does not accept mailed, faxed, or e-mailed submissions.

Before submitting your work, it is your responsibility to check that the manuscript is complete, grammatically correct, and without spelling or typographical errors. A few other important points:

  1. Give the journal aims and scope a final read. Is your manuscript definitely a good fit? If it is not, the editor may decline it without peer review.
  2. Does your manuscript comply with our research and publishing ethics guidelines?
  3. Have you cleared any necessary publishing permissions?
  4. Have you followed all the formatting requirements laid out in these author guidelines?
  5. Does the manuscript contain any information that might help the reviewer identify you? This could compromise the blind peer review process. A few tips:
  • If you need to refer to your own work, use wording such as ‘previous research has demonstrated’ not ‘our previous research has demonstrated’.
  • If you need to refer to your own, currently unpublished work, don’t include this work in the reference list.
  • Any acknowledgments or author biographies should be uploaded as separate files.
  • Carry out a final check to ensure that no author names appear anywhere in the manuscript. This includes figures or captions.

Manuscripts must reach certain standards before referees are asked to consider them: submissions that are not in the correct format, or which cannot be downloaded and printed reliably may therefore be returned to authors without review. Authors should retain their electronic manuscript file in case of any difficulties arising during online submission.

When submitting a manuscript, authors should make a full statement to the Editors that their manuscript is completely original and unpublished. If the redundant or duplicate publication is attempted or occurs authors should expect prompt rejection of the submitted manuscript. Also, authors should make a full statement that all necessary acknowledgements have been made and the manuscript is approved by all authors and tacitly or explicitly by the responsible authorities where the work was carried out, and all persons entitled to authorship have been so included. They should also state that, if accepted, it will not be published elsewhere in the same form, in English or in any other language, including electronic publication, without the written consent of the editor of the AMPDR.

License to Publish:

Authors of accepted manuscripts will be asked to sign an agreement which allows AMPDR to hold the commercial rights. Papers will not be published until a signed form is received.

Although authors will transfer  the commercial rights to the publisher, they retain the right to use and share their    own    published    articles    (for personal    use, internal    institutional    use and scholarly sharing purposes), retain patent, trademark and other intellectual property rights (including raw research data), and proper attribution and credit for the published work.

The author must ensure that:

  • The work does not include libellous, defamatory or unlawful statements.
  • Authorship has been agreed prior to submission and no one has been ‘gifted’ authorship or denied credit as an author (ghost authorship).
  • that the work is not in infringement of any existing copyright


In publishing only original research, AMPDR is committed to deterring plagiarism, including self- plagiarism. Problematic manuscripts will be returned to the authors without peer review. AMPDR implements iThenticate Software for plagiarism detection.


If you are using any materials

  • Figures / tables / illustrations
  • Photos
  • Artwork
  • Maps
  • Extensive quotations / excerpts
  • Song lyrics and poetry
  • Screenshots
  • Computer programmes / software
  • Logos / trademarks

That have already been published elsewhere, you must obtain permission to reuse them from the copyright holder (this may be the publisher rather than the author) and include any required permission statements in the figure legends. This includes your own previously published material, if you are not the copyright holder. It is the author’s responsibility to secure all permissions prior to publication.

In order to include re-use material in your work, you must clear the following rights:

  • Non-exclusive rights to reproduce the material
  • Print and electronic rights
  • Worldwide English language rights
  • To use the material for the life of the work. That means there should be no time restrictions on its reuse, for example a one-year license.

Transparency and Openness Promotion (TOP) encourage authors to use the following guidelines:

  • Cite and fully reference all data, program code, and other methods in your article.
  • Include persistent identifiers, such as a Digital Object Identifier (DOI), in references for datasets and program codes. Persistent identifiers ensure future access to unique published digital objects, such as a piece of text or datasets. Persistent identifiers are assigned to datasets by digital archives, such as institutional repositories and partners in the Data Preservation Alliance for the Social Sciences (Data-PASS).
  • Follow appropriate international and national procedures with respect to data protection, rights to privacy and other ethical considerations, whenever you cite data.

Publication Charges:

AMPDR is an open access journal and freely available to all readers, it does not charge authors for article processing fees or submission fees.

Manuscript Submission Checklist

  • Files must be prepared using Microsoft Word and submitted electronically.
  • Length of abstract and manuscript do not exceed the word limits set out in the Author Guidelines
  • The title page, abstract, manuscript body, and references must be included in the manuscript file.
  • Title page includes full name of each contributing author, institutional affiliation, full postal address of each affiliation, the e-mail address of each author, and Name and email address of the corresponding author.
  • Structured abstract formatted according to the Author Guidelines.
  • A maximum of ten keywords.
  • References must be included at the end of the manuscript file and must be alphabetical in order.
  • The manuscript must make reference to each figure and table, and cite them in alphabetical order.
  • Tables provided in editable format, formatted using the table function of the word- processing program, and on a separate page, numbered and accompanied by a legend at the top.
  • Figures formatted in high quality, legible, numbered consecutively, and grouped together as a list at the end of the paper.
  • Permission to reproduce published material, or material that is not the original work of the listed authors, is required.

Revised papers

When authors make revisions to their article in response to reviewer comments, they are asked to submit a list of changes and any comments for transmission to the reviewers. The revised version is usually returned to the original reviewer if possible, who is then asked to affirm whether the revisions have been carried out satisfactorily.

Journal Identifiers

eISSN: 2812-4898
print ISSN: 2812-488X